Course Content
Topic 1 – Setting up the Stormwater Drainage Project
Download and unzip the Couse Data and review the terrain and proposed road design. Learn how to make SAG points in your gutter and create FLOWLINES that show where water will flow.
0/8
Lesson 1.1 Course Overview
05:16
Lesson 1.2 Download Course Training Data
00:50
Lesson 1.3 Opening 12d Model Projects and Sharing Data
07:26
Lesson 1.4 Create a Supertin
03:53
Lesson 1.5 Survey Topography, Display Contours, and Flow Arrows
03:19
Lesson 1.6 Create Downhill Strings
04:56
Lesson 1.7 Label Crest and Sag Locations
05:54
Lesson 1.8 Create a Chain
05:51
Topic 2 – Create and Edit a Stormwater Drainage Network
Create a Network of Nodes and Links both by drafting in 12d Model and by importing a polyline from CAD.
0/7
Lesson 2.1 Reasons for Pits and Add Locaters to View
06:06
Lesson 2.2 Proposed Network – Set Water String Defaults
02:45
Lesson 2.3 Creating Drainage Strings with Bad Drafting
04:57
Lesson 2.4 Convert CAD Line-work to Drainage Strings
03:55
Lesson 2.5 Introduction to Stormwater Network Editor
03:52
Lesson 2.6 Edit a Drainage String
05:45
Lesson 2.7 Create the other Drainage Strings to Complete the Network
05:28
Topic 3 – Stormwater Network Editor
Learn the fundamentals of the Water Network Editor (WNE), how to give unique names to your nodes, and how to set invert levels for every pipe in the network
0/6
Lesson 3.1 The top of the Network Editor Panel
03:17
Lesson 3.2 How to Change Pit Names
03:09
Lesson 3.3 12d Model Methodology – Grading the Network
05:22
Lesson 3.4 Network Editor – GLOBAL Tab
01:24
Lesson 3.5 Network Editor – DEFAULTS Tab
02:50
Lesson 3.6 Network Editor – Node and Link Tabs
02:17
Topic 4 – Editing the Stormwater Network
Fundamentals of Editing the Network, including adding node and link types, and options for graing with minimum cover, minimul grade, and lining up pipe obverts.
0/8
Lesson 4.1 Lets Increase the Cover Under the Roads
04:28
Lesson 4.2 Lets make some changes to the Pit Types
04:29
Lesson 4.3 The Drainage.4d File
04:12
Lesson 4.4 Create a Node/Pit type in your Working Folder
04:14
Lesson 4.5 Copy Nodes and Load Nodes / Links from your User Folder Location
02:03
Lesson 4.6 Lets make further changes to the Pit Types
03:34
Lesson 4.7 Create and use a Road Design File
09:08
Lesson 4.8 Network Grading Options
05:21
Topic 5 – Advanced Edits – Taking Control of your Network
A Cover File is required to give your pipes the correct depth below ground. Learn how to edit and used the Cover File, and it's companions the Grade and Drop files
0/5
Lesson 5.1 Create a new Inter-Allotment Drainage Line
05:56
Lesson 5.2 Why use a Cover file Grade File and Drop File
06:39
Lesson 5.3 The Grade File
04:22
Lesson 5.4 The Drop File
02:59
Lesson 5.5 Why use the “Locks” on your SW Network
06:40
311 – Stormwater Drainage – Essential Geometric Techniques
About Lesson

Lesson 1.1 Course Overview

A PowerPoint presentation giving you a high level overview of this course. The slides using in the presentation have been taken from a completed project that you will achieve if you complete this course.

Lesson by: Steve Kostakis

Previous
Next
0% Complete